Differential pressure transmitters for room pressure monitoring

The MF-PFT series can measure the airflow in combination with the self-averaging MFS flow sensors in addition to differential pressure. Besides analog outputs, this series also features a built-in PI controller, which can directly controll a fan. Due to the high accuracy and stability, the MF-PFT is ideal for use in laboratories, hospitals and clean rooms. Each instrument is fully programmable.

The Kimo CP110 series is a differential pressure transmitter with or without display. The CP111, CP112 and CP113 are ideal for filter monitoring applications with an analog output to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo CP210 is a differential pressure transmitter that can also be used as a flow transmitter in combination with the Debimo averaging pitot tubes or Micatrone MFS series flow sensors. The CP211 and CP212 have an automatic zero setting. The CP210 has a PT100 input for an additional temperature measurement.

For cleanrooms, conditioned rooms and industrial ventilation applications where accurate measurement, control and monitoring of air parameters are critical, Sauermann's Si-C320 transmitters provide reliable measurements and help you meet the most stringent regulations.

The Sauermann Si-CPE320 is excellent for use in clean rooms. It is possible to mount the transmitter completely flush-mounted so that no dirt or dust can remain on it. The transmitter features a waterproof front panel made of high-quality stainless steel with an integrated touchscreen and is resistant to cleaning with hydrogen peroxide.

The ATM420 is a touchscreen display that is designed as audiovisual room pressure monitoring in clean rooms, operating rooms or isolation rooms. The display provides visual monitoring that functions as a traffic light. If the pressure difference is correct, the entire display will turn green and outside the desired values the display will turn red. In addition, the display has a built-in acoust...

The Dwyer DH3 series Digihelic differential pressure gauge is a 3-in-1 instrument with a digital display, relay contacts and a transmitter output, all packed in the popular Photohelic housing. By combining these 3 functions, you can reduce different instruments to one product, saving you inventory, installation time and money. The DH3 controller is the ideal instrument for pressure (difference)...

The Dwyer pressure monitor series RPMC is designed for critical applications with low differential pressures. The transmitter uses a capacitive pressure sensor to achieve extremely high accuracy. There is a choice between ± 0.25% or ± 0.5% RSS. The RPMC has the same dimensions as the Magnehelic which simplifies an upgrade in the field. The pressure monitor is suitable for applications requiring...

The Dwyer pressure monitor series RPMC is designed for critical applications with low differential pressures which must also be directly visible locally. The 4.3” full color touchscreen can be configured to measure positive or negative pressure in, for example, cleanrooms, hospitals, isolation rooms and laboratories. The Dwyer RSME Room Status Monitor is a complete solution featuring a touchscr...

The Dwyer pressure monitor series RPME is designed for critical applications with low differential pressures. The transmitter uses a piezo pressure sensor to achieve high accuracy. There is a choice between ±0.5% or ±1% RSS. The RPME has the same dimensions as the Magnehelic which simplifies an upgrade in the field. The pressure monitor is suitable for applications requiring strict pressure mon...

Micaflex MF-P / MF-PD is a pressure transmitter designed for low positive, negative and differential pressure in air-handling and ventilation systems where low pressure measuring is needed. They have an adjustable damping and a choice between a 0-10 V or 4-20 mA output. All transmitters can be delivered with or without a LCD display.

PEL - differential pressure transmitters are made for clean / isolation room applications. The zero point of the transmitter remains exact by means of the automatic zeroing, eliminating regularly possible zero point drifting. The PEL has 8 measuring ranges, all selectable at commissioning. Available with or without a display.

The Sauermann Kimo Si-ATE320 is a flush-mount display that clearly presents measurement values from external sensors and transmitters. This display is ideal for HVAC, cleanrooms, and industrial installations, where multiple parameters such as temperature, humidity, airflow, and pressure need to be monitored.

The Series 605 Magnehelic Indicating Transmitter provides for both visual monitoring and electronic control of very low differential pressure. The Series 605 is ideal for control applications in building HVAC systems The easily read dial gage is complimented by the two-wire, 4-20 mA control signal utilizing the timeproven Dwyer® Magnehelic® gage mechanical design and Series 600 transmitter tech...