Instrumentation for your market

The Foxboro IAP10 series is a compact and robust absolute pressure transmitter for direct process mounting. The IAP10 series is available in different measuring ranges of 2.1 bar, 21 bar and 210 bar absolute pressure. As signal output you can choose 1-5V, 4-20 mA, Hart, Foudation Fielbus and FoxCom. The IAP10 series is available in a safe area version or explosion-proof version according to ATE...

The Foxboro IGP10 series is a compact and robust gauge pressure transmitter for direct process mounting. The IGP10 series is available in different measuring ranges of 500 mbar, 2.1 bar, 21 bar and 210 bar relative pressure. As signal output you can choose 1-5V, 4-20 mA, Hart, Foudation Fielbus and FoxCom. The IGP10 series is available as a safe area version, but also as an explosion-proof vers...

The 84C series vortex mass flowmeter complements the Foxboro family of intelligent, powerful vortex flowmeters. The 84C series is available with 4 to 20 mA, HART® 7 and pulse output and is equipped with temperature compensation for mass flow measurement of saturated steam (saturated steam) and liquids. In addition, the Foxboro 84C has the patented Active Tuning technology that significantly imp...

The Foboro Accutech series consists of these pressure transmitters. The GP10 is a wireless relative (guage) pressure transmitter for static pressure measurement with a range of 250 to 10,000 psig (17 - 690 Barg). The AP10 series is a wireless absolute pressure transmitter with a range of 30 to 250 psig (2 - 17 BarA). The Accutech transmitters communicate with the Accutech base station over dist...

The IAP05S series is a budget-friendly pressure transmitter within the Schneider Electric range and is standard SIL2 certified. The IAP05S measures an absolute pressure with an accuracy of 0.075% of the chosen measuring range, varying from 50 kPa to 345 bar. This makes the IAP05S pressure transmitter somewhat less accurate than its bigger brothers, but also a lot cheaper. For less demanding app...

The IGP05S series is a budget-friendly pressure transmitter within the Schneider Electric range and is standard SIL2 certified. The IGP05S measures a relative pressure with an accuracy of 0.075% of the selected measuring range, ranging from 50 kPa to 345 bar. This makes the IGP05S pressure transmitter less accurate than its bigger brothers, but also a lot cheaper. For less demanding application...

The IAP10S series is a very robust and advanced pressure transmitter within the Schneider Electric range and is SIL2 certified as standard. The IAP10S measures an absolute pressure with an accuracy of 0.05% of the reading. Thanks to the special FoxCal technology, one transmitter has no less than 11 calibration curves in a pressure range of 0-414 bar. This allows the same model of pressure trans...

The IGP10S series is a very robust and advanced pressure transmitter within the Schneider Electric range and is SIL2 certified as standard. The IGP10S measures a relative pressure with an accuracy of 0.05% of the reading. Thanks to the special FoxCal technology, one transmitter has no less than 11 calibration curves in a pressure range of 0-414 bar. This allows the same model of pressure transm...

The IAP50S series is a very robust and extremely accurate pressure transmitter within the Schneider Electric range and is SIL2 certified as standard. The IAP50S measures an absolute pressure with an accuracy of 0.025% of the reading. Thanks to the special FoxCal technology, one transmitter has no less than 11 calibration curves in a pressure range of 0-414 bar. This allows the same model IAP50S...

The IGP50S series is a very robust and extremely accurate gauge pressure transmitter within the Schneider Electric range and is SIL2 certified as standard. The IGP50S measures a relative pressure with an accuracy of 0.025% of the reading. Thanks to the special FoxCal technology, one transmitter has no less than 11 calibration curves in a pressure range of 0-414 bar. This allows the same model...

The wireless WGP10 relative pressure sensors measure the pressure of various industrial processes and transmit them wirelessly to a central collector (WCC10). This sends the values from multiple sensors via WirelessHART to any central system. There are versions with pressure ranges up to 2.1, 21 or 70 bar. The field sensors are explosion-proof according to ATEX and Canadian and American guideli...

The wireless WAP10 absolute pressure sensors measure the pressure of various industrial processes and transmit them wirelessly to a central collector (WCC10). This sends the values from multiple sensors via WirelessHART to any central system. There are versions with pressure ranges up to 2.1 bar absolute. The field sensors are explosion-proof according to ATEX and Canadian and American guidelines.

The Schneider Electric LR74 series consists of non-contact radar level meters for liquids. The LR74 series can detect levels in aggressive and corrosive liquids.

The reliable IVL air velocity transmitters work on the hot-wire measurement principle, which quarantees very good accuracy at low air velocity. The transmitters are suitable for air flow and temperature measurements in the air ducts. Air velocity transmitters are available with different measurement ranges and immersion lengths, with or without display.

TEK temperature sensors are designed for automatic ventilating systems to detect duct temperature. Sensors are mounted to the duct by means of an adjustable duct connection flange for optimal temperature detection

The Foxboro® brand Models 15A, 13A, and 13HA pneumatic d/p Cell transmitters measure differential pressure and transmit a standard pneumatic signal to receivers which may be several hundred metres or yards away. Foxboro d/p Cell Transmitters have been the standard of process industry ever since they were developed and introduced for sale more than 30 years ago. Many thousands of successful, tro...

The Foxboro 43AP pneumatic controller is a versatile process instrument controller that can be used to control pressure, temperature, flow and level. As with all process controllers, the Foxboro 43AP pneumatic controller continuously detects the difference between a process measurement and its set point.

The Foxboro Model 11GM Transmitters accurately measure gauge pressure and transmit a proportional pneumatic output signal to receivers which may be several hundred meters or yards away.

The MiniAir®20 is a vane air velocity, hygrometer and thermometer in one instrument. The multifunction handheld measures flow of gaseous and fluid media, relative humidity and temperature. The high precision makes this handset particularly suitable for laboratory applications. For the measurement of flow in aggressive gases, there are also special stainless steel vane detectors.

The LoRa SPY data recorders use the public LoraWAN network, which has national coverage in the Netherlands via provider KPN. Due to the strong LoRa signal it is possible to place the loggers almost everywhere, even in fridges with the door closed. The local display on the logger shows the last measured value and the recorders send their data directly to the MySirius software in the cloud via th...

Micaflex MF-P / MF-PD is a pressure transmitter designed for low positive, negative and differential pressure in air-handling and ventilation systems where low pressure measuring is needed. They have an adjustable damping and a choice between a 0-10 V or 4-20 mA output. All transmitters can be delivered with or without a LCD display.

PEL - differential pressure transmitters are made for clean / isolation room applications. The zero point of the transmitter remains exact by means of the automatic zeroing, eliminating regularly possible zero point drifting. The PEL has 8 measuring ranges, all selectable at commissioning. Available with or without a display.

Model 1950 explosion proof pressure pressure switch combines the best features of the popular1900 series with an integral explosion-proof and weatherproof housing, making it an exceptional value for either application. It is CE, UL and CSA listed, FM approved for use in Class I, Div 1, Groups C and D, Class II Groups E, F, and G and Class III hazardous atmospheres (NEMA 7 & 9), Raintight NEMA 3...

The Model 1950G Explosion-Proof Switch combines the best features of the popular Dwyer® Series 1950 Pressure Switch with the benefit of natural gas compatibility. Units are rain-tight for outdoor installations, And are ATEX approved CE ATEX II 2G Exd IIB+H2 T6. Adjustment to the set point of the switch can be made without disassembly of the housing.