Level

The general purpose ultrasonic level transmitter provides continuous level measurement up to 49.2" (1.25m) with a 4-20 mA signal output, and is configured via our free WebCal software. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is widely selected for small...

The general purpose ultrasonic level transmitter provides continuous level measurement up to 9.8' (3m) with a 4-20 mA signal output, and is configured via our free WebCal software. The level sensor has 4 programmable relays with selectable hysteresis and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is...

The general purpose ultrasonic level transmitter provides continuous level measurement up to 18.0' (5.5m) with a 4-20 mA signal output, and is configured via the free Webcal software. The level sensor has 4 programmable relays with selectable hysteresis and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor...

The magnetic, explosion proof, level switches of FineTek are custom made​​. Length, number of switching points and fitment can be made ​​according to customer specifications. The level switches consist of high quality materials and are quality controlled. The function of the switch, NO or NC, is easily set by the user. All switches are available with explosion proof ATEX certificate.

FineTek's side mounted float level sensor are manufactured specifically for horizontal mounting in a tank or vessel. The sensors have a marine approval or are intrinsically safe. Ideal for the process industry of maritime industry.

The SC2400 Series is a compact and inexpensive vibrating level switch by Finetek. The tuning fork is applicable in both liquids and bulk. The BSP threaded connection, transistor output and high temperature and pressure capacity of the SC2400 is an excellent solution for many installations. For more demanding apllications where the SC2400 is not sufficient, the SC series of FineTek offers many m...

The Finetek SC-Probe series works on the same principle as a tuning fork, but has the advantage that the sensor is in one piece. Thus, the medium can not sit between the sensor, which, in a traditional tuning fork can be the case. The SC2100 is the standard version that can be completely custom made​​, there is also an ATEX certified version, the SC1700.

The UNS-VA/SB4 is a rugged and sturdy bilge level switch made from stainless steel. It is especially designed for shipbuilding industry, offshore, oil tanks and sewage works. The UNS-VA/SB4 has 4 standard cable lengths : 1, 5, 10 and 15 meter.

The UNS-VA/SB5 with test function, is a rugged and sturdy bilge level switch made from stainless steel. It is especially designed for shipbuilding industry, offshore, oil tanks and sewage works. The UNS-VA/SB5 has 4 standard cable lengths : 1, 5, 10 and 15 meter.

The LU10 series ultrasonic level switch provides reliable level detection of chemical liquids, solvents, hydrocarbons and petroleum based fluids. Media examples include fuel, acetone and hydrochloric acid. The submersible polypropylene or PFA sensor can be mounted through the tank wall or in the tank as a high or low level alarm.

The Flowline LZ12 vibration level switch provides reliable liquid level detection of dirty liquids such as those with light to medium coating, scaling or foaming characteristics with a relay output. Media examples include wastewater, diluted caustic soda and light weight oil. For optimum performance, the liquid level switch automatically adjusts for coating build up, and if necessary, outputs a...

The Switch-Tek LO10 optical level switch provides reliable leak detection in and around wells, tanks and piping systems. The 1A relay contact switches on detection of, among other things, sulfuric acid, water and diesel. The submersible polypropylene or PFA leak detection sensor can be mounted through a tank wall or in a room.

The Switch-Tek LP15 series offers reliable high or low level detection for water-based conductive liquids with light pollution, such as copper sulphate and saline. The submersible polypropylene level switch can be mounted by a non-metallic tank wall, or inside a tank as a high or low level alarm.

The Switch-Tek LP50 series capacitive level switch provides reliable level detection of water-based conductive liquids such as hydrochloric acid, sulfuric acid and water. The level sensor is mounted on the outside of a non-metallic tank and can be used as a high or low level alarm. The sensor detects a level through walls up to 25 mm thick.

The Mini Bypass Level Indicator is the "light" version in the family available with lengths up to 3000 mm, medium temperatures up to 150 °C and pressures up to 16 bar max.

These compact level switches are ideal for monitoring hydraulic Power Packs. The UNS1000-BN18 are custom made with lengths up to 600 mm. Optional,a temperature monitoring can be mounted in the stem of the float.

The brass multi float switches with NBR floats in the series UNS1000-VA are available with one to five switching points. These level switches for top mounting are custom made in any length up to one meter. With the standard 1 "BSP connection, these floats can be easily mounted into a socket on top of a tank.

The all stainless steel multi float switches in the series UNS1000-VA are available with one to five switching points. These level switches for top mounting are custom made in any length up to one meter. With the standard 1 "BSP connection, these floats can be easily mounted into a socket on top of a tank.

The Barksdale UNS2000 multi level switches are used in a multitude of industrial applicaitons. The level switches are custom made and are available in a wide range of mounting elements, electrical connections, various materials and options. Several shipbuilding approvals or intrinsically safe approval available

The FineTek EB5200 capacitance level transmitter measures a level by the difference in capacity between the probe and a metal tank wall. A reference probe is needed in case of non metalic tanks. The electronic capacitance measurement is not affected by noise, dust, fog and temperature changes.

The JFR series, developed by Finetek, is a 26 GHz radar level transmitter that detects liquid, powder and bulk levels with contact. The 5-digit display shows level linear, but can also be programmed with a curve, for silo's or spherical shaped tanks. There are versions for normal liquids and solids, but also specifically for corrosive liquids. In addition to the 26GHz embodiment, there is also...

The Barksdale USE3000 float transmitter is ideal as a top mount level transmitter assembly. The robust float switches has a series of reed contacts along the stem which generates a variable resistor 100 khm output. Optionally, this can be converted to 4-20 mA ouput. The USE3000 can be custom manufactured to a maximum length of 3000 mm. Longer lengths (up to 6000 mm) and ATEX certified versions...

The SE series rotary paddle level switches are suitable for simple detection of solids and powders in bulk tanks, silos and containers. The paddle rotates with one rotation per minute, and switches a contact if powders, granules or other dry substances are present. The switch can be used as a level controller, or as a low or high level alarm detection.

The Finetek SB series capacitive level switch detects levels of liquids, powders and bulk. This is designed to reduce adhesion of the medium at the sensor to a minimum. This product offers a DPDT output for high or low level detection, adjustable delay and an adjustable sensitivity. Several models are available for high temperatures, or limited installation space.