All instrumentation

The BTS3000 electronic temperature switch series offers a compact, reliable and flexible temperature measurement. The BTS3000 can be used as a thermostat, but can also optionally be equipped with an analog output, so that it also functions as a temperature transmitter. The temperature sensors can be put together according to their wishes. Different measuring ranges, process connection and plug-...

The BEKA BA307E-SS series 4-20mA panel indicators are designed and certified for use in Ex e, Ex n, Ex p and Ex i systems. This "robust" indicators can withstand high impacts from the outside. Versatile certification makes these new indicators suitable to be safely installed in Ex e, Ex Ex n or p panel housing without additional mechanical protection, which leads to simplification of constructi...

The Switch-Tek LO10 optical level switch provides reliable leak detection in and around wells, tanks and piping systems. The 1A relay contact switches on detection of, among other things, sulfuric acid, water and diesel. The submersible polypropylene or PFA leak detection sensor can be mounted through a tank wall or in a room.

The Switch-Tek LP15 series offers reliable high or low level detection for water-based conductive liquids with light pollution, such as copper sulphate and saline. The submersible polypropylene level switch can be mounted by a non-metallic tank wall, or inside a tank as a high or low level alarm.

The Switch-Tek LP50 series capacitive level switch provides reliable level detection of water-based conductive liquids such as hydrochloric acid, sulfuric acid and water. The level sensor is mounted on the outside of a non-metallic tank and can be used as a high or low level alarm. The sensor detects a level through walls up to 25 mm thick.

The MBLT miniature submersible level transmitter is only 0.63˝ in diameter making it ideal for level monitoring in well and borehole applications with 4 to 20 mA or 0 to 5 V output. Designed for years of trouble free service, the MBLT has a welded 316 SS body and 316 SS nose cap. Body top is also 316 SS and tapered to prevent damage or snares when pulling the unit out of the installation. Featu...

The BA304G series is a compact version of the intrinsically safe Beka displays. This model can be exchanged with the old BA304B and BA304C series. The robust IP66 enclosure makes the display suitable for a very rough environment, such as the (petro) chemical industry, shipping and hydraulics.

The FineTek SQ series pressure switch is ideal for building in industrial machines and hydraulic power packs due to its compact size. There are standard versions of 10 to 300 bar with an adjustable switching point and a DIN43650 form A connector for the electrical connection. Optionally there are also custom models with an NPT process connection, a fixed switching point and choice of other mate...

The 425X series from Barksdale is a compact explosion-proof pressure transmitter. The compact size makes the 425X suitable as an OEM transmitter for machines and hydraulic powerpacks that are used in an ATEX zone. There are a large number of measuring ranges up to 689 bar relative pressure and optionally also absolute pressure.

The Dwyer SAH Smart Air Hood is a revolution in the field of balometers. The patented design ensures minimal resistance and the balometer is pre-calibrated for each type of grid. This makes the SAH the most reliable balometer on the market. The hood can easily be clamped between the floor and the ceiling with the included telescopic rod. The readout device communicates wirelessly with the hood...

The Dwyer CDTA series carbon dioxide meter combines three measurements in one compact housing. The CDTA measures CO2, humidity and temperature, but can also be used as a set point generator. Communication with a GBS or PLC is via Modbus®, or BACnet, which can be chosen in the field. To facilitate installation, the RS485 address can be set using dip switches. The CDTA uses a non-dispersive infra...

The BTT series temperature transmitters are ideal for measuring temperature in air ducts. Sensor lengths of up to 450 mm insertion are possible for duct mounting sensors. The plastic terminal box with fastening tabs makes the installation easier.

The DX series differential pressure switch is suitable for detecting water pressure differences within the building automation. The DX series can be used as filter monitoring, but also as a flow monitor in, for example, a pump, heating system or cooling machine. The switch is robust and easy to install with the integrated mounting bracket. The splashproof housing makes it possible to place the...

The 2000-HA Series High Accuracy Magnehelic® pressure differential manometer is twice as accurate as the standard Magnehelic® manometer. The High Accuracy Magnehelic® pressure differential manometer provides a mirrored overlay to eliminate any parallax errors when measuring. A six-point calibration certificate is included with any high-precision model. The robust IP67 housing (front) helps to c...

The Dwyer GSTA series is a carbon monoxide (CO) transmitter for room or channel mounting. The GSTA series can be selected with and without display and has a 0-10 V or 4-20 mA output. Optionally there is an implementation with Modbus or BACnet communication.

The Dwyer AVUL series measures air speed and volume flow in ventilation ducts. The AVUL works on a hot wire principle with special coating for a long life. There may be chosen for English or metric units. Furthermore, there are analogue outputs, but also versions for Smart Buildings with BACnet or Modbus communication.

The Dwyer RHP-D series has a combined temperature and humidity sensor for installation in air ducts. There can be selected from different precision and a performance with or without display. There are several outputs that allow the sensor to be read on any type of BMS.

The Dwyer BTT-E series is a simple space temperature transmitter for wall mounting. For the analogue output, you can choose between 4-20 mA and 0-10 V, so that the transmitters can be connected to any BMS.

The Dwyer BTT-R series is a temperature transmitter for outdoor mounting with radiation shield. The weather shelter ensures that the temperature measurement is not affected by direct sunlight. The BTT-R temperature transmitter has an analogue output for coupling to each building management system.

The Kimo GP500 series is a differential pressure generator for calibrating differential pressure meters. Due to compact size and convenient carrying case, the GP500 calibrator is also easy to use in the field.

Kimo's GH500 series is a relative humidity calibrator with internal humidity generator. The GH500 is suitable for calibration of measuring equipment in a calibration laboratory or on the road.

The ATM420 is a touchscreen display that is designed as audiovisual room pressure monitoring in clean rooms, operating rooms or isolation rooms. The display provides visual monitoring that functions as a traffic light. If the pressure difference is correct, the entire display will turn green and outside the desired values the display will turn red. In addition, the display has a built-in acoust...

The Beka BR323 series consists of ATEX certified, explosion-proof (Ex d), loop-powered displays in aluminum or stainless steel housing. The configuration and calibration can be performed with a simple Windows software via a serial communication cable. Measurement units can be displayed on an alphanumeric five-digit display under the numeric display. The characters are entered via the configurat...

The FS2 series is a vane switch for flow detection in water pipes. These flow switches can be used as flow detection in cooling systems and central heating systems in building automation. The switch can be used to detect whether or not there is flow in a water pipe to start or stop the operation of a pump. The FS2 series has a brass threaded connection and the vane is made of stainless steel.