Instrumentation for your market

The IGP50S series is a very robust and extremely accurate gauge pressure transmitter within the Schneider Electric range and is SIL2 certified as standard. The IGP50S measures a relative pressure with an accuracy of 0.025% of the reading. Thanks to the special FoxCal technology, one transmitter has no less than 11 calibration curves in a pressure range of 0-414 bar. This allows the same model...

The IDP50S series is a very robust and extremely accurate differential pressure transmitter within the Schneider Electric range and is SIL2 certified as standard. The IDP50S measures a pressure difference with an accuracy of 0.025% of the reading. Thanks to the special FoxCal technology, one transmitter has no less than 11 calibration curves in a pressure range of 0-414 bar. This allows the sam...

The wireless WRT10 temperature sensors measure the temperature of various industrial processes and send them wirelessly to a central collector (WCC10). This sends the values from multiple sensors via WirelessHART to any central system. There are RTD and thermocouple versions from -200 to + 885 ° C with various insertion lengths between 50 and 400 mm. Optionally, thermowells in various lengths c...

The wireless WGP10 relative pressure sensors measure the pressure of various industrial processes and transmit them wirelessly to a central collector (WCC10). This sends the values from multiple sensors via WirelessHART to any central system. There are versions with pressure ranges up to 2.1, 21 or 70 bar. The field sensors are explosion-proof according to ATEX and Canadian and American guideli...

The wireless WAP10 absolute pressure sensors measure the pressure of various industrial processes and transmit them wirelessly to a central collector (WCC10). This sends the values from multiple sensors via WirelessHART to any central system. There are versions with pressure ranges up to 2.1 bar absolute. The field sensors are explosion-proof according to ATEX and Canadian and American guidelines.

The wireless WDP10 differential pressure sensors measure the differential pressure of various industrial processes and transmit them wirelessly to a central collector (WCC10). This sends the values from multiple sensors via WirelessHART to any central system. There are versions with differential pressure ranges up to 500 mbar, 2.1 bar or 21 bar. The field sensors are explosion-proof according t...

The Barksdale BDS3000 series is an electronic differential pressure switch, designed for monitoring (hydraulic) filter systems. There are versions with one or two switching contacts, but also with an analog output, so that it can be used as a differential pressure transmitter. There are different measurement ranges from 350 mbar to 35 bar. The BDS3000 is suitable as filter monitoring, but can a...

The 167LP pneumatic buoyancy transmitter is designed to perform measurements for liquid level, interface level and density of liquids. The measurement is based on the Archimedes buoyancy principle that works without any moving parts. The 167LP provides a 3-15 psi (0,2-1 bar) pressure output. Beacause of the fully pneumatic design without electronics it can withstand extreme high and low tempera...

The Dwyer Magnesense Series MSX Pro differential pressure transmitter is the professional differential pressure transmitter that meets rigorous industry standards with innovative product design. The instrument has exceptional stability for use in critical building applications with the versatility of our original series Magnesense transmitters. Pressure ranges in Pa, mmH2O, and inWC are availab...

The CFS300A is the cost effective solution for accurate measurement for a variety of applications. The CFS300A reliably measures mass, density, volume, temperature, volume concentration or solid content. Dual-straight tube with optimized flow splitter, for general purpose applications and process control. End connections available for ½” (DN15) to 4” (DN100).

The CFS400A has been developed to meet the demanding custody transfer requirements of the oil and gas industry and is well suited to bulk measurement in many applications. The option of Super Duplex (UNS S32760) provides a maximum operating pressure of 180 barg. A high level of performance makes the CFS400A suitable for the bulk measurement of petroleum and oil as well as products like syrup, m...

The CFS700A is the only sensor for mass flow with a single straight measuring tube that is available in Titanium, Stainless Steel, Hastelloy® or Tantalum. Single straight tube without flow splitter for lowest pressure drop, for advanced applications and harsh environments. End connections available for ½” (DN15) to 4” (DN100).

The CFT34A Coriolis mass flow transmitter will provide the highest performance possible across a wide range of applications. For the measurement of liquids or gases, cryogenic to high temperature fluids, single or multi-phase fluids and advanced digital signal processing techniques is used to give accurate measurements of mass flow, density and temperature. It is developed according to IEC 615...

The Schneider Electric LR64 series consists of non-contact radar level meters for solids. The LR64 series can detect levels in solids from granules to stones.

The Schneider Electric LR65 series consists of non-contact radar level meters for solids. The LR65 series can detect level in solids from fines to powders.

The Schneider Electric LR74 series consists of non-contact radar level meters for liquids. The LR74 series can detect levels in aggressive and corrosive liquids.

The Schneider Electric LR75 series consists of non-contact radar level meters for liquids. The LR75 series can detect level of liquids in narrow tanks with obstacles.

The Schneider electric 6500W series is a battery-powered magnetic flow meter. This water meter has been developed for drinking water applications in remote locations where mains power is not available. Of course it is also suitable for other applications where battery power is useful. For locations with mains voltage, there is the FlexPower unit, with which the 6500W can also be connected to 23...

The Schneider Electric RMU998 Remote Mounting Unit is the solution for series SRD998 and SRD991 valve actuators in extreme environments, such as very low or very high temperatures, high vibrations. The position of the actuator is determined by an external potentiometer in the RMU998, which passes the signal to the positioner mounted in another protected environment.

The Foxboro 43AP pneumatic controller is a versatile process instrument controller that can be used to control pressure, temperature, flow and level. As with all process controllers, the Foxboro 43AP pneumatic controller continuously detects the difference between a process measurement and its set point.

The Foxboro Model 11GM Transmitters accurately measure gauge pressure and transmit a proportional pneumatic output signal to receivers which may be several hundred meters or yards away.

The Beka Pageant is an intrinsically safe, panel-mounted 7-inch (177 mm) operator display with backlighting and touch buttons. It supports a plug-in CPU module with integrated PLC software and up to seven plug-in input and output modules. Powered by a single BEKA Power Isolator, it ensures easy installation and optimal reliability.