Instrumentation for your market

De SRP981 is een volledig pneumatische klepstandsteller. De positioner is geschikt voor het bedienen van een pneumatische klepaandrijving en kan worden aangestuurd met een pneumatisch stuursignaal van bijvoorbeeld 3 tot 15 psi. De SRP981 klepstandsteller is explosieveilig door zijn constructieve mechanische ontwerp. De positioner kan worden uitgebreid met intrinsiekveilige eindstand schakelaars...

Foxboro Eckardt smart positioner series SRD998

The Foxboro Accutech series includes these wireless differential pressure transmitters. The DP20 is a wireless differential pressure transmitter with ranges up to +/- 300in H20 (+/- 762mm H2O). The Accutech transmitters communicate with the Accutech base station over distances up to 48 km.

De SRI990 is een intrinsiekveilige electro-pneumatische klepstandsteller. De positioner is geschikt voor het bedienen van een pneumatische klepaandrijving en is geschikt voor directe montage op een lineaire en rotorende. De SRI990 communiceert met 4-20 mA. De SRI990 klepstandsteller is intrinsiekveilig uitgevoerd en daarmee explosieveilig volgens ATEX, FM en CSA.

De TM10 is een draadloze transmitter voor turbine flowmeters (niet inbegrepen). De Accutech TM10 zet de puls-uitgang van een turbine flowmeter om in een actuele flow, maar telt ook de totale flow. De waardes van de draadloze Accutech transmitters kunnen over afstanden tot wel 1000 meter in het vrije veld worden gecommuniceerd. De TM10 transmiiter heeft een robuuste explosieveilige behuizing vol...

The IDP05S series is a budget-friendly differential pressure transmitter within the Schneider Electric range with standard SIL2 certification. The IDP05S measures a pressure difference with an accuracy of 0.075% of the chosen measuring range, ranging from 50 kPa to 207 bar. This makes the IDP05S differential pressure transmitter less accurate than its bigger brothers, but also a lot cheaper. Fo...

The IDP10S series is a very robust and advanced differential pressure transmitter within the Schneider Electric range and is SIL2 certified as standard. The IDP10S measures a pressure difference with an accuracy of 0.05% of the reading. Thanks to the special FoxCal technology, one transmitter has no less than 11 calibration curves in a pressure range of 0-414 bar. This allows the same model of...

The LevelWave LR01 is designed to perform continuous level measurement in a wide range of industries and applications. Foxboro is known for more than 50 years of experience in level measurement as a leading supplier of extremely robust, durable and reliable level measurements. Unaffected by changes in temperature, specific gravity, pressure and with no need to recalibrate, offering a highly ava...

The IDP50S series is a very robust and extremely accurate differential pressure transmitter within the Schneider Electric range and is SIL2 certified as standard. The IDP50S measures a pressure difference with an accuracy of 0.025% of the reading. Thanks to the special FoxCal technology, one transmitter has no less than 11 calibration curves in a pressure range of 0-414 bar. This allows the sam...

The wireless WRT10 temperature sensors measure the temperature of various industrial processes and send them wirelessly to a central collector (WCC10). This sends the values from multiple sensors via WirelessHART to any central system. There are RTD and thermocouple versions from -200 to + 885 ° C with various insertion lengths between 50 and 400 mm. Optionally, thermowells in various lengths c...

The wireless WDP10 differential pressure sensors measure the differential pressure of various industrial processes and transmit them wirelessly to a central collector (WCC10). This sends the values from multiple sensors via WirelessHART to any central system. There are versions with differential pressure ranges up to 500 mbar, 2.1 bar or 21 bar. The field sensors are explosion-proof according t...

The Barksdale BDS3000 series is an electronic differential pressure switch, designed for monitoring (hydraulic) filter systems. There are versions with one or two switching contacts, but also with an analog output, so that it can be used as a differential pressure transmitter. There are different measurement ranges from 350 mbar to 35 bar. The BDS3000 is suitable as filter monitoring, but can a...

The 167LP pneumatic buoyancy transmitter is designed to perform measurements for liquid level, interface level and density of liquids. The measurement is based on the Archimedes buoyancy principle that works without any moving parts. The 167LP provides a 3-15 psi (0,2-1 bar) pressure output. Beacause of the fully pneumatic design without electronics it can withstand extreme high and low tempera...

The CFS300A is the cost effective solution for accurate measurement for a variety of applications. The CFS300A reliably measures mass, density, volume, temperature, volume concentration or solid content. Dual-straight tube with optimized flow splitter, for general purpose applications and process control. End connections available for ½” (DN15) to 4” (DN100).

The CFS400A has been developed to meet the demanding custody transfer requirements of the oil and gas industry and is well suited to bulk measurement in many applications. The option of Super Duplex (UNS S32760) provides a maximum operating pressure of 180 barg. A high level of performance makes the CFS400A suitable for the bulk measurement of petroleum and oil as well as products like syrup, m...

The CFS700A is the only sensor for mass flow with a single straight measuring tube that is available in Titanium, Stainless Steel, Hastelloy® or Tantalum. Single straight tube without flow splitter for lowest pressure drop, for advanced applications and harsh environments. End connections available for ½” (DN15) to 4” (DN100).

The CFT34A Coriolis mass flow transmitter will provide the highest performance possible across a wide range of applications. For the measurement of liquids or gases, cryogenic to high temperature fluids, single or multi-phase fluids and advanced digital signal processing techniques is used to give accurate measurements of mass flow, density and temperature. It is developed according to IEC 615...

The Schneider Electric LR64 series consists of non-contact radar level meters for solids. The LR64 series can detect levels in solids from granules to stones.

The Schneider Electric LR65 series consists of non-contact radar level meters for solids. The LR65 series can detect level in solids from fines to powders.

The Schneider Electric LR75 series consists of non-contact radar level meters for liquids. The LR75 series can detect level of liquids in narrow tanks with obstacles.

The Schneider electric 6500W series is a battery-powered magnetic flow meter. This water meter has been developed for drinking water applications in remote locations where mains power is not available. Of course it is also suitable for other applications where battery power is useful. For locations with mains voltage, there is the FlexPower unit, with which the 6500W can also be connected to 23...

The Schneider Electric RMU998 Remote Mounting Unit is the solution for series SRD998 and SRD991 valve actuators in extreme environments, such as very low or very high temperatures, high vibrations. The position of the actuator is determined by an external potentiometer in the RMU998, which passes the signal to the positioner mounted in another protected environment.

The Beka Pageant is an intrinsically safe, panel-mounted 7-inch (177 mm) operator display with backlighting and touch buttons. It supports a plug-in CPU module with integrated PLC software and up to seven plug-in input and output modules. Powered by a single BEKA Power Isolator, it ensures easy installation and optimal reliability.

Bourdon tube explosion proof pressure switches with direct-acting pressure sensor and the snap-acting microswitch provide very high accuracy and long life span. Ranges available from 5 to 950 bar, with 1 (B1X) or 2 (B2X) separate setpoints.