All instrumentation

The Finetek SB series capacitive level switch detects levels of liquids, powders and bulk. This is designed to reduce adhesion of the medium at the sensor to a minimum. This product offers a DPDT output for high or low level detection, adjustable delay and an adjustable sensitivity. Several models are available for high temperatures, or limited installation space.

The Finetek SD series optical level detection operates on the principle of reflection of light in a prism. If the sensor is surrounded by air, the light beam will be reflected on the sensor wall, and when it is surrounded by liquid, the light beam will be interrupted. The sensor thus detects a liquid level without any moving parts. It is a simple and robust solution for applications in for exam...

The Finetek EE300 series electro mechanical level measurement provides solutions for the measurement of of bulk and powders levels where a radar or ultrasonic measuring principle does not work. The EE300 series lowers a weight along a cable and detects when it touches the surface. The length of the cable is then equal to the level. This process repeats and an analog output signal is generated,...

The BLS3000 is an electronic version of a traditional float switch. On the clear LCD display you can read the current level and with the built-in PNP contacts you can monitor a low or high level. In addition to the switching outputs, there are also versions with an analogue 4-20 mA, or 0-10 Volt output. The BLS3000 can be used as a float switch, but also as a level transmitter.

The Barksdale T9692X series explosion-proof compact temperature switches are ideal for potentially explosive locations and heavy industrial applications. The compact and robust design makes the switches ideal for applications with little space. The switches are ATEX, CSA and UL certified for explosion-proof application. In addition to the ATEX Ex d certification, there is also a special intrins...

The Barksdale T2H series is a mechanical thermostat with two switch contacts that can be set individually. The switches are unmatched in robustness and reliability. The weatherproof housing can also be ordered with a shipbuilding approval, or ATEX intrinsically safe certificate. The standard capillary length is 1.8 meters, but can optionally be supplied in longer lengths.

The EG Series is a magnetostrictive level transmitter for accurately measuring levels of a wide range of fluids. This measurement principle sends a frequency pulse by the voice of the sensor with which it detects the magnitude of the magnet in the float. This modern measurement technique provides higher accuracy than traditional float level transmitters. The EG series can be performed with a si...

Max Machinery P001 Series Piston Flow Meters work on the positive displacement principle. This principle measures flow based on a fixed amount of pistons, which measure these flowmeters very accurately. The P001 is designed for a very low flow of 0.005 ml per minute. The piston flow meters are suitable for hydrocarbon based liquids and can exhibit very high pressures and temperatures.

The FineTek EPD30 electromagnetic flowmeter offers industry a wide range of designs to meet even the most demanding process applications in diverse sectors such as chemistry, energy, oil and gas, metal and mining. The powerful transmitter is easy to use and delivers the output signal that meets your needs. EPD30 offers a versatile, reasonably priced, accurate flowmeter for your applications. Th...

The MiniAir64 vane anemometer measures the speed of gaseous media and water, with a direct 4-20mA output. The Swiss Precision MiniAir64 Vane probe is unique. The lamella rotation has a very low resistance and is not affected by pressure, temperature, density and humidity. The MiniAir64 is also available with an ATEX certificate.

The Echowave LG10-11 series radar level transmitters are available with three types of probes. The liquid level transmitter continuously measures the level up to 5.5 m with a 4-20 mA output signal and is configured with the free WebCal software. This liquid level sensor is used in non-turbulent environments with foam, vapor, condensation and at high temperature or pressure. Select the rod or ca...

The Flowline LR30 series general purpose 26 GHz. pulse radar level transmitter provides continuous level measurement up to 98.4’ (30m) with a 4-20 mA signal output, and is configured via its remote push button display module. The non-contact liquid level sensor is intended for industrial wastewater, municipal storm or sewer lift station, reservoir, river, canal or open channel applications loca...

The EST series is a temperature and level monitoring system for grain silos that consists of combined level and temperature sensors and a software package. The EST110 is only a temperature sensor and the EST120 is both temperature and level monitoring via a single cable. The installation is very simple due to the flexible cable.

Extremely precise and maintenance-free measurement of wind speed and wind direction even in the lowest temperature. The accurate wind sensor uses the run-time differential method for determining the wind speed and wind direction. It provides output for instantaneous values, vector and scalar means, the maximum gust of wind and wind direction, the maximum/minimum values and the virtual temperatu...

Extremely precise and maintenance-free measurement of wind velocity and wind direction as well as calculation of acoustic virtual temperature. The ultrasonic wind sensor is designed without mechanical parts as they have been used with traditional "cups and vanes". The digital or analog output delivers instantaneous, average, min or max value with flexible measuring rate. The V200A-UMB is heated...

The Foxboro IDP10 series is a compact and robust differential pressure transmitter for direct process mounting. The IDP10 series is available in different measuring ranges of 75 mbar, 500 mbar, 2.1 bar, 21 bar and 210 bar differential pressure. As signal output you can choose 1-5V, 4-20 mA, Hart, Foudation Fielbus and FoxCom. The IDP10 series can be designed as a differential pressure transmitt...

The Foxboro CFT51 series digital Coriolis Mass Flow and Density Transmitter is an improvement of the CFT50 flow meters that introduced a completely new technology in the field of coriolis flow measurement. In combination with a Foxboro CFS10 or CFS20 flow tubes, the CFT51 series forms a mass flow and density meter. The digital signal processing (DSP) offers improved flowmeter performance and ad...

The Foxboro CFS10 and CFS20 mass flow tubes form a Coriolis mass flow measurement together with the CFT51 series Coriolis transmitter. The principle of Coriolis acceleration is used, with which real mass flow measurements of liquids can be carried out directly, without the need for a separate temperature, pressure or density meter. The CFS10 has a single flow tube and is available in diameters...

The CFS25 mass flow tubes can be combined with a CFT51 Coriolis flow transmitter to form a Coriolis mass flow and density meter. The principle of Coriolis acceleration is used, with which real mass flow measurements of liquids can be carried out directly, without requiring external temperature, pressure or density measurements. The CFS25 series consists of flow tubes with a double pad. The liqu...

The 8600MP and 8700MP series from Eldridge consists of thermal mass flowmeters for gases. This inline version contains a piece of straight pipe in which the thermal mass flow sensor is included. The pipe diameter can be selected so that it matches the existing process pipe. The flow transmitter is mounted directly on the housing and has an integrated display. The 8600MP and 8700MP mass flowmete...

The 8800MP series from Eldridge consists of thermal mass flowmeters for gases. This insertion version can be installed in a socket, independent of the pipe diameter. This makes installation easy, even in an existing process piping. The flow transmitter is mounted directly on the housing and has an integrated display. The 8800MP mass flowmeters are explosion-proof according to ATEX, IECex, CSA a...

The Foxboro® 84F series consists of intelligent, high-performance vortex flow meters with flange or NPT connections. The flow meters have standard pulse and a 4-20 mA output with Hart communication. A built-in LCD display with pushbuttons is offered for local configuration of the 84F series. No other vortex flow meter is as accurate in the field of liquid, gas and steam flow measurements at tem...

The Foxboro Levelstar 244LVP series consists of level meters with a displacement (buoyancy) measurement principle. This principle is based on the law of Archimedes that states that the upward force is equal to the weight of the displaced liquid. This makes the LevelStar also suitable for measuring level differences between two different liquids (interface). The LevelStar series immediately meas...

The Foxboro Levelstar 244LD series consists of level meters with a displacement (buoyancy) measurement principle. This principle is based on the law of Archimedes that states that the upward force is equal to the weight of the displaced liquid. This makes the LevelStar also suitable for measuring level differences between two different liquids (interface). The LevelStar series immediately measu...