HVAC air handling and ventilation

The Dwyer CDTA series carbon dioxide meter combines three measurements in one compact housing. The CDTA measures CO2, humidity and temperature, but can also be used as a set point generator. Communication with a GBS or PLC is via Modbus®, or BACnet, which can be chosen in the field. To facilitate installation, the RS485 address can be set using dip switches. The CDTA uses a non-dispersive infra...

The BTT series temperature transmitters are ideal for measuring temperature in air ducts. Sensor lengths of up to 450 mm insertion are possible for duct mounting sensors. The plastic terminal box with fastening tabs makes the installation easier.

The DX series differential pressure switch is suitable for detecting water pressure differences within the building automation. The DX series can be used as filter monitoring, but also as a flow monitor in, for example, a pump, heating system or cooling machine. The switch is robust and easy to install with the integrated mounting bracket. The splashproof housing makes it possible to place the...

The Dwyer GSTA series is a carbon monoxide (CO) transmitter for room or channel mounting. The GSTA series can be selected with and without display and has a 0-10 V or 4-20 mA output. Optionally there is an implementation with Modbus or BACnet communication.

The Dwyer AVUL series measures air speed and volume flow in ventilation ducts. The AVUL works on a hot wire principle with special coating for a long life. There may be chosen for English or metric units. Furthermore, there are analogue outputs, but also versions for Smart Buildings with BACnet or Modbus communication.

The Dwyer RHP-D series has a combined temperature and humidity sensor for installation in air ducts. There can be selected from different precision and a performance with or without display. There are several outputs that allow the sensor to be read on any type of BMS.

The Dwyer BTT-E series is a simple space temperature transmitter for wall mounting. For the analogue output, you can choose between 4-20 mA and 0-10 V, so that the transmitters can be connected to any BMS.

The Dwyer BTT-R series is a temperature transmitter for outdoor mounting with radiation shield. The weather shelter ensures that the temperature measurement is not affected by direct sunlight. The BTT-R temperature transmitter has an analogue output for coupling to each building management system.

The Dwyer DH3 series Digihelic differential pressure gauge is a 3-in-1 instrument with a digital display, relay contacts and a transmitter output, all packed in the popular Photohelic housing. By combining these 3 functions, you can reduce different instruments to one product, saving you inventory, installation time and money. The DH3 controller is the ideal instrument for pressure (difference)...

Series 477 handheld digital manometers are packed with features you need to make pressure measurement and recording faster, easier and more accurate than ever. You can instantly select from up to nine of the most widely used pressure units. A non-volatile memory function enables storage of up to 40 readings. Other main features are: display HOLD, audible alarm, visual alarm, backlight with au...

Series 490A Digital Manometers are versatile, hand-held, battery operated manometers available in several basic ranges for positive or positive differential pressure measurement and can tolerate most liquid media compatible with 316LSS. A memory function allows storage of up to 40 readings.

The Dwyer CDT series CO2 transmitters are equipped with an NDIR (infrared) sensor. The transmitters are available in a wall-mounted version and in a version for duct mounting. Optionally, the transmitters are also available with a temperature output and SPST relay contact. Unique for this CO2 measurement is that it can also be used for rooms that are used 24 hours a day. Other sensors use the p...

The ATEX certified AT2DH3 series Digihelic® differential pressure controller is a 3-in-1 instrument that consists of a digital differential pressure gauge, relay contacts for alarms, or on-off control and a transmitter output. The AT2DH3 can also be used to measure air velocities and flow in combination with a pitot tube. The AT2DH3 has an analogue 4-20 mA output and two SPDT relay contacts wit...

The ATEX approved AT1ADPS differential pressure switch is designed for overpressure, underpressure and differential pressure applications in potentially hazardous areas. The large adjustment knob with scale makes it very easy to set the switching point. The AT1ADPS differential pressure switch is available in different switching ranges between 20 and 4000 Pa. The aluminum flame proof ATEX housi...

The Dwyer CDWP series consists of inductive CO2 transmitters for, for example, livestock farming (chicken barns), technical areas, monitoring of CO2 cooling systems and greenhouses. The CDWP measures the carbon dioxide content with an infrared (NDIR) measuring cell with a long lifespan. This sensor technology offers the highest accuracy compared to automatic baseline correction (ABC logic), whi...

The Dwyer Magnesense Series MSX Pro differential pressure transmitter is the professional differential pressure transmitter that meets rigorous industry standards with innovative product design. The instrument has exceptional stability for use in critical building applications with the versatility of our original series Magnesense transmitters. Pressure ranges in Pa, mmH2O, and inWC are availab...

The Kimo PST series is a differential pressure switch with indicator. The PST is ideal for filter monitoring applications. The status LED indicates if an alarm level is exceeded and the current pressure is shown on the display. The installation is very easy because the housing can be mounted in two parts making it ideal for installers.

The Kimo CP110 series is a differential pressure transmitter with or without display. The CP111, CP112 and CP113 are ideal for filter monitoring applications with an analog output to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo CP110 series is a differential pressure transmitter with or without display. The CP114 and CP115 are ideal for filter monitoring applications with an analog output to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo CP116 series is a barometric pressure transmitter with or without display. The CP116 measures the athmospheric air pressure. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The TST series temperature switches can be used as temperature sensors for controlling temperatures in rooms or ducts. The status LED indicates if an alarm level is exceeded and the display shows the current temperature. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo TM110 series is a transmitter with or without display. The TM110 is ideal for use as a temperature measurement in rooms and air ducts for connection to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo TM210 series is a transmitter with or without display. The TM210 is ideal for use as a temperature measurement in rooms and air ducts for connection to a building management system. This temperature transmitter has an internal sensor and a PT100 input, or two PT100 inputs for measuring temperature differences.

The Kimo HST series humidity switches can be used as a humidistat in rooms or ducts. The status LED indicates if an alarm level is exceeded and the display shows the current relative humidity. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.