All instrumentation

The reliable IVL air velocity transmitters work on the hot-wire measurement principle, which quarantees very good accuracy at low air velocity. The transmitters are suitable for air flow and temperature measurements in the air ducts. Air velocity transmitters are available with different measurement ranges and immersion lengths, with or without display.

Infrared thermometer KIRAY 100 with dual laser sighting is a key tool to diagnose, inspect and check any temperature, with the advantage of using “no-contact” technology. You can safely measure surface temperatures of hot objects, dangerous or difficult to access. Perfect tool to take temperature in a house, a garage, a workshop, an office, a car, a kitchen et cetera.

Rugged and reliable the Series L4 Flotect Level switch operates automatically to indicate tank level. Perfect for starting or stopping pumps, opening or closing valves, or actuate level alarm signals. Horizontal installation or optional top mount vertical installation. ATEX version available.

Model L8 Flotect Liquid Level Switch features a leak proof body and float constructed from tough, durable polyphenylene sulfide which has excellent chemical resistance. This compact and reliable control is designed to handle temperatures up to (100°C and pressures to 10 bar.

The LV110 series offers three different vane probes for measuring air velocities. There are van probes of 14, 70 and 100 mm. Standard functions: min, max, hold, auto power off and choice of units. Each instrument is supplied in a sturdy carrying case and calibration report or test certificate (S models).

Dwyer Mark II series molded manometers are of the inclined and inclined-vertical types. The curved inclined-vertical tube of the Mark II manometers can be mounted on any vertical surface with the two mounting screws provided. Ranges available from 0-80 mmH2O and from -10 to + 700 Pa.

Micaflex MF-FD is a flow linear differential pressure transmitter specially developed for measuring air flow, together with all types of flow sensors with known flow constant, e.g. MFS flow sensor in ventilation ducts, chambers and rooms. They have an adjustable damping and a choice between a 0-10 V or 4-20 mA output. The flow transmitter is fitted with a 4-digit LED display for indicaiton of c...

The Micaflex MF-P / MF-PD is a differential pressure transmitter for measuring positive pressure, negative pressure or differential pressure, with or without a display.

Micaflex MF-P / MF-PD is a pressure transmitter designed for low positive, negative and differential pressure in air-handling and ventilation systems where low pressure measuring is needed. They have an adjustable damping and a choice between a 0-10 V or 4-20 mA output. All transmitters can be delivered with or without a LCD display.

The MF-PFA series can measure the airflow in combination with the self-averaging MFS flow sensors in addition to differential pressure. Besides analog outputs, this series also features a built-in PI controller, which can directly controll a fan and 2 swithes for local alarms. Due to the high accuracy and stability, the MF-PFA is ideal for use in laboratories, hospitals and clean rooms. Each in...

The MF-PFT series can measure the airflow in combination with the self-averaging MFS flow sensors in addition to differential pressure. Besides analog outputs, this series also features a built-in PI controller, which can directly controll a fan. Due to the high accuracy and stability, the MF-PFT is ideal for use in laboratories, hospitals and clean rooms. Each instrument is fully programmable.

The MFS flowsensor is a patented, self-averaging flow-sensor for all kinds of ventilation ducts. The average of air flow is measured across the whole length of the sensor. Gives a 2,5 times higher differential pressure than a Prandtl tube measuring. Easy to install in existing ducts. Lengths from 100 to 2500 mm.

Micatrone's flow sensor MFS-SS has been developed to meet the great demand for accurate air flow measurement in all types of air-handling systems. The MFS-SS is based on the principle of averaging the velocity profile over the height or the diameter of the duct.

Mechanical temperature switch for local mount in a weatherproof housing. The setpoint is adjustable from the exterior,

The MP Mini-Photohelic differential pressure switch/gage combines the time proven Minihelic II differential pressure gage with two SPDT switching setpoints. The Mini-Photohelic gage is designed to measure and control positive, negative, or differential pressures consisting of non-combustible and non-corrosive gases. Gage reading is independent of switch operation. This extremely compact switch...

A reliable and accurate portable instrument for measuring pressure and differential pressure. Standard functions are: min, max, hold, self-calibration, adjustable automatic shut-off and backlight. Each instrument is supllied with a transport case, tubing, calibration certificate (model E) or adjusting certificat (model S).

A reliable and accurate portable instrument for measuring pressure and differential pressure and air velocity. (with pitot tube). Standard functions are: min, max, hold, self-calibration, adjustable automatic shut-off and backlight. Each instrument is supllied with a transport case, tubing, calibration certificate (model E) or adjusting certificat (model S)

The Series MS Magnesense Differential Pressure Transmitter is an extremely versatile transmitter for monitoring pressure and air velocity. This compact package is loaded with features such as: field selectable english or metric ranges, field upgradeable LCD display, adjustable dampening of output signal (with optional display) and ability to select a square root output for use with pitot tubes...

Mechanical temperature switch for remote mount in a weatherproof housing. The setpoint is adjustable from the exterior.

The Dwyer RHP-E series is a combined room temperature and humidity sensor for wall mounting. There can be chosen from different accuracies and a housing with or without display. There are several outputs that allow the sensor to be read on any type of GBS.

The Rate-Master® flowmeter line of direct reading precision flowmeters incorporates many unique user features at moderate cost. These low cost flowmeters are ideal for general use.

Dwyer SA 1100 is an extremely rugged pressure switch that assures excellent reliability. The pressure switch has a visual setpoint and an adjustable deadband, up to 5% of measuring range. Wetted parts are available in aluminium and stainless steel.

The SC2400 Series is a compact and inexpensive vibrating level switch by Finetek. The tuning fork is applicable in both liquids and bulk. The BSP threaded connection, transistor output and high temperature and pressure capacity of the SC2400 is an excellent solution for many installations. For more demanding apllications where the SC2400 is not sufficient, the SC series of FineTek offers many m...

The Finetek SC-Probe series works on the same principle as a tuning fork, but has the advantage that the sensor is in one piece. Thus, the medium can not sit between the sensor, which, in a traditional tuning fork can be the case. The SC2100 is the standard version that can be completely custom made​​, there is also an ATEX certified version, the SC1700.