All instrumentation

Mechanical pressure switch with stainless steel diaphragm for pressure control in explosion-proof areas. Adjustment ranges from 1 mbar up to 10 bar. Available with 1 contact (D1X) or 2 contacts (D2X).

The general purpose ultrasonic level transmitter provides continuous level measurement up to 49.2" (1.25m) with a 4-20 mA signal output, and is configured via our free WebCal software. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is widely selected for small...

The general purpose ultrasonic level transmitter provides continuous level measurement up to 9.8' (3m) with a 4-20 mA signal output, and is configured via our free WebCal software. The level sensor has 4 programmable relays with selectable hysteresis and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is...

The general purpose ultrasonic level transmitter provides continuous level measurement up to 18.0' (5.5m) with a 4-20 mA signal output, and is configured via the free Webcal software. The level sensor has 4 programmable relays with selectable hysteresis and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor...

The Dwyer series DM-2000 differential pressure transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The DM-2000 housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic gage. A wide range of models are available factory calibrated to specific ranges. Pressure connections are inherent to the glass filled pla...

The Series DPG has a high ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. Series DPG is battery powered and has an auto-shut off to conserve battery life. Battery life, on average, will last 2000 hours. A 4 button key pad allows easy access to features without the need to...

The Series DPG-200 digital pressure gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process ou...

The series DPGA is the only economic digital pressure gage with selectable engineering units on the market. With its 1% accuracy and digital push-button zero, the DPGA is the perfect choice for digitally monitoring the pressures of air and compatible gases.

The Series DPGW is the only economic digital pressure gage for liquids with the ability to select engineering units on the market. With its 1% accuracy and digital push-button zero, the DPGW is the perfect choice for digitally monitoring the pressures of compatible liquids and gases. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commo...

Pressure switch E1H provide high accuracy, long life span and high proof pressure due to their design diaphragm seal piston. It can be equipped with manual reset for alarm functions.

The magnetic, explosion proof, level switches of FineTek are custom made​​. Length, number of switching points and fitment can be made ​​according to customer specifications. The level switches consist of high quality materials and are quality controlled. The function of the switch, NO or NC, is easily set by the user. All switches are available with explosion proof ATEX certificate.

FineTek's side mounted float level sensor are manufactured specifically for horizontal mounting in a tank or vessel. The sensors have a marine approval or are intrinsically safe. Ideal for the process industry of maritime industry.

The Flowline FT10-GT10 is available in liquid and gas sensors, the general purpose flow switch provides reliable low or no-flow detection of relatively clean, non-coating media with a relay output. Liquid examples include water and acetic acid. Available in Polypropylene and PVDF, the short flow sensor is used in pipe or ducting from 1/2" to 1,5", and the long flow sensor is used in 2" and up....

Explosion-proof, heavy duty, industrial pressure switch which provides sensitivity to differential pressure as low as 25 mbar up to 14 bar with a max. static pressure of 100 bar. This unit has a standard aluminium pressure chamber but is also available in 316 stainless steel. Approvals : UL, CSA, CE and ATEX.

The HP range of inclined liquid column manometers, measure slight variations in pressure, depression or differential pressure of air or gas. The are particulary recommended for measuring overpressure in clean rooms, laboratories, aseptic rooms and laminar flows.

Rugged and reliable the Series L4 Flotect Level switch operates automatically to indicate tank level. Perfect for starting or stopping pumps, opening or closing valves, or actuate level alarm signals. Horizontal installation or optional top mount vertical installation. ATEX version available.

Model L8 Flotect Liquid Level Switch features a leak proof body and float constructed from tough, durable polyphenylene sulfide which has excellent chemical resistance. This compact and reliable control is designed to handle temperatures up to (100°C and pressures to 10 bar.

Dwyer Mark II series molded manometers are of the inclined and inclined-vertical types. The curved inclined-vertical tube of the Mark II manometers can be mounted on any vertical surface with the two mounting screws provided. Ranges available from 0-80 mmH2O and from -10 to + 700 Pa.

Micaflex MF-FD is a flow linear differential pressure transmitter specially developed for measuring air flow, together with all types of flow sensors with known flow constant, e.g. MFS flow sensor in ventilation ducts, chambers and rooms. They have an adjustable damping and a choice between a 0-10 V or 4-20 mA output. The flow transmitter is fitted with a 4-digit LED display for indicaiton of c...

The Micaflex MF-P / MF-PD is a differential pressure transmitter for measuring positive pressure, negative pressure or differential pressure, with or without a display.

The MF-PFA series can measure the airflow in combination with the self-averaging MFS flow sensors in addition to differential pressure. Besides analog outputs, this series also features a built-in PI controller, which can directly controll a fan and 2 swithes for local alarms. Due to the high accuracy and stability, the MF-PFA is ideal for use in laboratories, hospitals and clean rooms. Each in...

The MF-PFT series can measure the airflow in combination with the self-averaging MFS flow sensors in addition to differential pressure. Besides analog outputs, this series also features a built-in PI controller, which can directly controll a fan. Due to the high accuracy and stability, the MF-PFT is ideal for use in laboratories, hospitals and clean rooms. Each instrument is fully programmable.

The MFS flowsensor is a patented, self-averaging flow-sensor for all kinds of ventilation ducts. The average of air flow is measured across the whole length of the sensor. Gives a 2,5 times higher differential pressure than a Prandtl tube measuring. Easy to install in existing ducts. Lengths from 100 to 2500 mm.

Micatrone's flow sensor MFS-SS has been developed to meet the great demand for accurate air flow measurement in all types of air-handling systems. The MFS-SS is based on the principle of averaging the velocity profile over the height or the diameter of the duct.