Level

The Barksdale USE3000 float transmitter is ideal as a top mount level transmitter assembly. The robust float switches has a series of reed contacts along the stem which generates a variable resistor 100 khm output. Optionally, this can be converted to 4-20 mA ouput. The USE3000 can be custom manufactured to a maximum length of 3000 mm. Longer lengths (up to 6000 mm) and ATEX certified versions...

The SE series rotary paddle level switches are suitable for simple detection of solids and powders in bulk tanks, silos and containers. The paddle rotates with one rotation per minute, and switches a contact if powders, granules or other dry substances are present. The switch can be used as a level controller, or as a low or high level alarm detection.

The Finetek SB series capacitive level switch detects levels of liquids, powders and bulk. This is designed to reduce adhesion of the medium at the sensor to a minimum. This product offers a DPDT output for high or low level detection, adjustable delay and an adjustable sensitivity. Several models are available for high temperatures, or limited installation space.

The Finetek SD series optical level detection operates on the principle of reflection of light in a prism. If the sensor is surrounded by air, the light beam will be reflected on the sensor wall, and when it is surrounded by liquid, the light beam will be interrupted. The sensor thus detects a liquid level without any moving parts. It is a simple and robust solution for applications in for exam...

The Finetek EE300 series electro mechanical level measurement provides solutions for the measurement of of bulk and powders levels where a radar or ultrasonic measuring principle does not work. The EE300 series lowers a weight along a cable and detects when it touches the surface. The length of the cable is then equal to the level. This process repeats and an analog output signal is generated,...

The BLS3000 is an electronic version of a traditional float switch. On the clear LCD display you can read the current level and with the built-in PNP contacts you can monitor a low or high level. In addition to the switching outputs, there are also versions with an analogue 4-20 mA, or 0-10 Volt output. The BLS3000 can be used as a float switch, but also as a level transmitter.

The EG Series is a magnetostrictive level transmitter for accurately measuring levels of a wide range of fluids. This measurement principle sends a frequency pulse by the voice of the sensor with which it detects the magnitude of the magnet in the float. This modern measurement technique provides higher accuracy than traditional float level transmitters. The EG series can be performed with a si...

The Echowave LG10-11 series radar level transmitters are available with three types of probes. The liquid level transmitter continuously measures the level up to 5.5 m with a 4-20 mA output signal and is configured with the free WebCal software. This liquid level sensor is used in non-turbulent environments with foam, vapor, condensation and at high temperature or pressure. Select the rod or ca...

The Flowline LR30 series general purpose 26 GHz. pulse radar level transmitter provides continuous level measurement up to 98.4’ (30m) with a 4-20 mA signal output, and is configured via its remote push button display module. The non-contact liquid level sensor is intended for industrial wastewater, municipal storm or sewer lift station, reservoir, river, canal or open channel applications loca...

The EST series is a temperature and level monitoring system for grain silos that consists of combined level and temperature sensors and a software package. The EST110 is only a temperature sensor and the EST120 is both temperature and level monitoring via a single cable. The installation is very simple due to the flexible cable.

The Foxboro Levelstar 244LVP series consists of level meters with a displacement (buoyancy) measurement principle. This principle is based on the law of Archimedes that states that the upward force is equal to the weight of the displaced liquid. This makes the LevelStar also suitable for measuring level differences between two different liquids (interface). The LevelStar series immediately meas...

The Foxboro Levelstar 244LD series consists of level meters with a displacement (buoyancy) measurement principle. This principle is based on the law of Archimedes that states that the upward force is equal to the weight of the displaced liquid. This makes the LevelStar also suitable for measuring level differences between two different liquids (interface). The LevelStar series immediately measu...

The Flowline UG01 series reflective ultrasonic level transmitter offers continuous level measurement up to 3 meters with a 4-20 mA analog signal output and four relay contacts. The UG01 series is configured via the user-friendly WebCal software. The non-contact liquid level sensor is equipped with our patented Reflective Technology ™ that delivers reliable level measurement even with condensati...

The Barksdale UNS2000-S series is a level switch with one or multiple floats. The UNS200-S version is specially designed for marine and shipping and provided with approvals such as GL, RINA and LR. The float switches are completely made of stainless steel and can be fitted with a process connection with BSP thread or DIN flanges.

The LevelWave LR01 is designed to perform continuous level measurement in a wide range of industries and applications. Foxboro is known for more than 50 years of experience in level measurement as a leading supplier of extremely robust, durable and reliable level measurements. Unaffected by changes in temperature, specific gravity, pressure and with no need to recalibrate, offering a highly ava...

The 167LP pneumatic buoyancy transmitter is designed to perform measurements for liquid level, interface level and density of liquids. The measurement is based on the Archimedes buoyancy principle that works without any moving parts. The 167LP provides a 3-15 psi (0,2-1 bar) pressure output. Beacause of the fully pneumatic design without electronics it can withstand extreme high and low tempera...

The Schneider Electric LR64 series consists of non-contact radar level meters for solids. The LR64 series can detect levels in solids from granules to stones.

The Schneider Electric LR65 series consists of non-contact radar level meters for solids. The LR65 series can detect level in solids from fines to powders.

The Schneider Electric LR74 series consists of non-contact radar level meters for liquids. The LR74 series can detect levels in aggressive and corrosive liquids.

The Schneider Electric LR75 series consists of non-contact radar level meters for liquids. The LR75 series can detect level of liquids in narrow tanks with obstacles.

The level switch Vibraswitch-C from Klay-Instruments is a robust switch based on the vibrating fork measurement principle. The sensor is electronically vibrated and registers the difference in resonance frequency, on which it switches. The compact level switch is suitable for all liquids. Due to the vibrating forks, operation is not affected by flow, turbulence, air bubbles or vibrations in the...

Klay-Instruments' robust level switch Vibraswitch-S is based on the vibrating fork measurement principle. The level switch is compact and suitable for all liquids. Due to the high frequency combined with the robust vibrating forks, operation is not affected by flow, turbulence, air bubbles or vibrations in the process.