Kimo Sauermann

De Kimo KT320 is een datalogger met een interne temperatuurmeting en 2 externe ingangen voor het meten van temperatuur, luchtvochtigheid, spanning, stroom en plus-signalen.

De Kimo thermokoppel temperatuur datalogger KTT220 heeft twee ingangen voor een externe thermokoppel K, J, T, N of S sensoren.

De Kimo KPA320 is een datalogger voor het meten van temperatuur, luchtvochtigheid en barometrische druk voor binnenklimaat.

De Kimo luchtvochtigheid datalogger KH220 heeft een interne temperatuur en luchtvochtigheidssensor en één ingang voor een externe sensor.

De Kimo KCC320 is een datalogger voor het meten van temperatuur, luchtvochtigheid, barometrische druk en CO2 voor binnenklimaat.

De Kimo LV130 is een betrouwbare luchtsnelheidsmeter, ontworpen voor het meten van luchtsnelheid en luchtstromen in diverse toepassingen. Het instrument is uitgerust met een vaste vane-probe met een diameter van 100 mm, wat zorgt voor consistente en nauwkeurige meetresultaten.

The Kimo PST series is a differential pressure switch with indicator. The PST is ideal for filter monitoring applications. The status LED indicates if an alarm level is exceeded and the current pressure is shown on the display. The installation is very easy because the housing can be mounted in two parts making it ideal for installers.

The Kimo CP110 series is a differential pressure transmitter with or without display. The CP111, CP112 and CP113 are ideal for filter monitoring applications with an analog output to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo CP110 series is a differential pressure transmitter with or without display. The CP114 and CP115 are ideal for filter monitoring applications with an analog output to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo CP210 is a differential pressure transmitter that can also be used as a flow transmitter in combination with the Debimo averaging pitot tubes or Micatrone MFS series flow sensors. The CP211 and CP212 have an automatic zero setting. The CP210 has a PT100 input for an additional temperature measurement.

The TST series temperature switches can be used as temperature sensors for controlling temperatures in rooms or ducts. The status LED indicates if an alarm level is exceeded and the display shows the current temperature. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo TM110 series is a transmitter with or without display. The TM110 is ideal for use as a temperature measurement in rooms and air ducts for connection to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo TM210 series is a transmitter with or without display. The TM210 is ideal for use as a temperature measurement in rooms and air ducts for connection to a building management system. This temperature transmitter has an internal sensor and a PT100 input, or two PT100 inputs for measuring temperature differences.

The Kimo HST series humidity switches can be used as a humidistat in rooms or ducts. The status LED indicates if an alarm level is exceeded and the display shows the current relative humidity. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo HM110 series is a transmitter with or without display. The HM110 is ideal to use as humidity measurement in air ducts and rooms for connection to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo TH110 series is a relative humidity transmitter with or without display. The TH110 is ideal to use as humidity and temperature measurement in rooms and air ducts for connection to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo TH210 series is a relative humidity transmitter with or without display. The TH210 is ideal to use as temperature and humidity measurement in air ducts and rooms for connection to a building management system. The transmitter calculates the absolute humidity, dew point, wet and dry bulb temperature. For temperatures up to 180°C stainless steel sensors are available. There are also severa…

The Kimo CTV110 is a series of air velocity transmitters with or without display. The CTV110 is ideal to use as flow measurement in air ducts, fume hoods and laminar flow cabinets for connection to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo CTV210 is a series of air velocity transmitters with or without display. The CTV210 is ideal to use as flow measurement in air ducts, fume hoods and laminar flow cabinets for connection to a building management system. The transmitter can be carried out with a standard stainless steel probe, or a special omni-directional probe.

The Kimo LCC-S configuration software makes it very easy to program and configure Kimo class 110, 210 en 310 transmitters.

The new C310 series are multifonctional transmitters which can be extended by an internal pressure module and two external probes. The display can show up to 4 parameters, but can also display a trend graph and the min/max values of each channel. The C310 has two analog outputs, which can be extended by two more. Modbus and Ethernet communication are available as an option.

The Kimo CPE310 differential pressure transmitter is the successor of the CPE300. The transmitter can be flush mounted in a wall and can be calibrated using special connectors from the front. The CPE310 has an internal buzzer with acceptance and delay. Optionally, an external sensor for temperature and humidity, can be connected, the display then scrolls between the values​​. The CPE310-S has 3 a…

The Debimo self-averaging flow sensors work on the same principle as a pitot tube. The advantage of this measurement principle is that non-laminar air flow can still be measured reliably. The Debimo sensors are made of aluminum and are available in a wide range of standard lengths. In addition, the sensors can also be customized.

Differential pressure transmitter -250...250 Pa